Glossiest Car Finish

Best Detailing: How To Get The Glossiest Car Finish

Regular car washes and waxing keep your car looking new for a long time. But it is not enough to stop your vehicle from oxidizing over time. You need to find the best-detailing service in town that can take care of your automobile like a pro.

Use a clay bar to remove contaminants.

It removes embedded contaminants from the paint. Clay bars remove contaminants such as dirt, bird droppings, tree sap and industrial fallout that can dull the paint's finish. The clay bar removes these contaminants without scratching the clear coat on your vehicle's body panels.

Wash your car with a pH-neutral shampoo.

The most popular shampoo brands are Meguiar's Gold Class Car Wash Shampoo and Chemical Guys Car Shampoo Plus. However, if you want the best results, use a foam cannon or a foam gun to wash for car grooming.

Buff with a soft microfiber sponge.

A sponge is the best tool for polishing swirls and scratches from your paint. The softness of the sponge prevents scratching and will help spread the polish evenly across the vehicle's surface.

Use an orbital buffer with a foam pad to finish off the job.

If you're looking for a super glossy shine, then an orbital buffer is your best bet. These machines use high-speed spinning discs that can apply a lot of force on paint in short periods – but only if you know how to use them properly!

Paint sealant or ceramic coating?

Paint sealants are designed to protect a factory paint job from oxidation, fading and dirt. They're typically applied by hand with an orbital buffer or dual-action polisher. The process takes about 30 minutes per panel, depending on how many panels you have on your vehicle.

Ceramic coatings are much thicker than paint sealants and protect your car for up to five years against scratches, swirl marks and other imperfections in the clear coat layer of your vehicle's paint job. They're also more durable than traditional waxes or paint sealants — they make it easier to remove bugs and road tar from your car's finish without damaging it in the process. Ceramic coatings can be applied by either hand or automated applicators (often referred to as "guns").

Apply wax layer by layer.

After drying your vehicle with an absorbent chamois, apply a coat of wax such as Meguiar's Ultimate Liquid Wax with a soft foam applicator pad. Allow it to dry for about 20-30 minutes before buffing it off with a clean microfiber towel. A second coat can be applied if desired, but this is usually not necessary unless you live in an area where temperatures are below freezing most of the winter or if you're going on vacation at some point during warmer months.

Polish your tires, too.

Polish with a machine polisher after claying your vehicle. Machine polishers give you more control over how much pressure is applied to the paint than hand polishing does, so you can be sure that no swirls or scratches will appear on your vehicle's body panels after using one of these tools for polishing purposes.

Avoid DIY detailing mistakes.

Do not use anything abrasive on the paint finish of your car. This will only damage the paint and make it appear duller than before.

Use proper cleaning agents for different parts of the car. For example, use soap and water for cleaning glass surfaces and vinyl decals while using wax remover for removing wax from rubber trimming.

If you want to be able to show off a perfect car finish, you'll want to follow these methods and techniques. Many people aren't aware of how simple it can be to get the perfect glossy finish on your car. By following these 10 methods for the best detailing, you can ensure that your car looks great.